British Steam Car Challenge Team On Course For World Record Success!

"The Fastest Kettle In The World" on its way to setting a new high speed mark of 94.4mph [ctrl-click to launch video]. Image Credit: Don Wales – Test Driver BSCC

British Steam Car Challenge Team On Course For World Record Success!

Finally, after arriving in the United States June 23, 2009, the British Steam Car Challenge has been busy preparing their base camp and test run track in the Mojave Desert, at Rogers Dry Lake Bed on Edwards Air Force Base for this moment in time.

The British Steam Car Challenge Team pictured on Rogers Dry Lake Bed, Edwards AFB, with the three ton sleek British Steam Car, made from a mixture of lightweight carbon-fibre composite and aluminium wrapped around a steel space frame chassis. Image Credit: Don Wales – Test Driver BSCC

Yesterday, August 7, 2009, the British Steam Car Challenge Team has carried out four successful runs ahead of its bid to break the century-old world land speed record for steam-powered vehicles.

The 25ft-long British Steam Car dubbed “the fastest kettle in the world” reached speeds of over 131mph at Edward’s Air Force Base, California. This is faster than the current world record. The FIA was not present having to attend the activities at Bonneville Speed Week in Utah, so the mark will not be officially recognized.

The current official FIA record is 127mph previously set by American, Fred Marriott, driving a Stanley steam car in 1906. Another speed recorded by a steam-powered vehicle was set in 1985 at Bonneville, but at the time, no official FIA stewards were on hand to recognize it as official. The documented speed set by Bob Barber stands at 145.607mph.

The 133mph speed, while good enough to top the officially recognized FIA world land speed record, is still short of the BSCC stated goal of setting a mark that would eclipse both official and unofficial known speed marks. The 133 mph, however, allows the British Steam Car Challenge to claim that "the fastest kettle in the world” is in fact the second fastest vehicle powered by steam EVER.

Previous test speeds run in April, 2009 at Thorney Island, England had passes of 80 plus mph, and here in Southern California of almost 95mph, until yesterday's mark. The British team has hopes to overhaul the land speed record by reaching a target velocity of 170mph with their car.

Weighing three tons, the sleek British Steam Car is made from a mixture of lightweight carbon-fibre composite and aluminium wrapped around a steel space frame chassis. It is fitted with 12 boilers containing nearly two miles of tubing. Demineralised water is pumped into the boilers at up to 50 litres a minute and the burners produce three megawatts of heat. Steam is superheated to 400 degrees Celsius which is injected into the turbine at more than twice the speed of sound, according to a team spokesman.

The FIA will set up the course on Monday August 17, 2009 and official record attempts will be made on the mornings (~6.30 am to 10.30am USA time) from August 18-22, 2009.

... notes from The EDJE



TAGS: 127mph, 131mph, 145.607mph, Barber-Nichols Team, British Steam Car Challenge, BSCC, Matt Candy, Rogers Dry Lake Bed, Southern California, The EDJE

For The British Steam Car Challenge ... It's Base Camp Made, Course Laid!

The BSCC land speed car gets unloaded from its special shipping container and checked out at the base camp for the British Steam Car Challenge scheduled to begin July 13, 2009 and end July 24, 2009. Image Credit: BSCC

For The British Steam Car Challenge ... It's Base Camp Made, Course Laid!

The British Steam Car team arrived at Edwards Air Force Base on Monday 29 June.

Despite temperatures of over 100 degrees (that's dry heat) and a Fourth of July celebration, they have now established the BSCC Base Camp.

Team Manager, Matt Candy, says: "There's a lot of work to do before we can make the record attempts. We have to set up our communication system, check the radios, assemble the fuelling rigs, unpack the tools, obtaining the propane, get the fridge working and put the toilet in place. It's a bit like an Everest expedition but in baking heat rather than the freezing cold!"

One of the most nerve-wracking tasks was to check for any damage to the British Steam Car during transit. Fortunately, and this was largely because of the special shipping container which was made for it, the car arrived just as it had left the UK 21 days earlier.

The daily schedule the team has been working has been from before 5am. After 9am, due to the high temperatures. The heat , it is suspected, will affect the timing of the record attempts as well.

Candy says: "It can also get quite windy and by the afternoon it can get up to 20-30mph, we can't run the car if the wind is over 15mph."

Safety equipment to meet the regulations of the Southern Timing Association – the recognized body for Land Speed Records – has been fitted to the British Steam Car. Today the car will be inspected by representatives from the Southern Timing Association and the FIA (the international governing body of motor sport).

Tomorrow, the team's test driver, Don Wales, will arrive and dynamic test runs will start on Monday, July 13, 2009.

Candy says: "We then have a window until the 24th July in which to make the record attempts. Potentially, each run could be an attempt on the record but to qualify as an official record we have to turn the car around and make a run in the opposite direction within 60 minutes. Obviously, if a first run is not at the required speed we shan't attempt to go for the record. Instead, we'll wait and make another attempt to get a fast first run."

... notes from The EDJE

TAGS: BSCC, Don Wales, Edwards Air Force Base, July 13th, July 24th, Land Speed, Matt Candy, record attempts, Southern Timing Association FIA, The EDJE

British Steam Car In Los Angeles For World Land Speed Record Attempt

Following the two runs at Thorney Island on April 1st, the UK test program is now complete. It is a sobering thought that the car now has to go twelve times as far, at double the speed, twice, in one hour to achieve the record. We have much to learn, test and achieve on the lake bed in California. Image Credit: BSCC News

British Steam Car Arrives in Los Angeles in Preparation of its World Land Speed Record Attempt

The British Steam Car arrived this morning (5.00pm GMT) at Long Beach Port, Los Angeles in preparation for its World Land Speed Record Attempt. The vehicle departed Felixstowe last month via the Panama Canal on route to California.

The team has since been granted its entry license to Edward’s Air Force Base for the attempt to officially take place and the FIA confirmed. The team will commence further testing and subsequent attempts from 10th – 24th July 2009.

The primary aim of British Steam Car project is to establish an FIA sanctioned Land Speed Record and break the 103-year-old FIA record of 127mph achieved by American, Fred Marriott, driving a Stanley steam car in 1906. The FIA is the sanctioning body and now recognizes a land speed record as the average speed of two passes made across the same measured distance in opposing directions within 60 minutes of each other. The time of the two runs is then averaged to obtain the official recorded speed. While the mile in which the attempt is being made cannot move during the attempt, there is no limit to the runup or braking distance for the vehicle as well or location that the event must take place.

The car and all the ancillary equipment has been cleaned prepared and packed. The car, 6 support rigs, eight pallets of plastic boxes containing all the spares and essentials, including teabags, have found a home inside our two 40ft containers and the 20ft workshop container. Image Credit: BSCC News

The team acknowledges the achievements of the "Barber-Nichols Team". Their vehicle 'Steamin' Demon' is currently the fastest steam car in the world. In 1985 The Barber-Nichols Team carried out three successful passes and achieved an American National Record at 145.607mph. There was no attempt to establish an FIA record. However, the British Steam Car Challenge recognizes this speed as the record to exceed.

Image Credit: BSCC News

From its inception, the British Steam Car was designed to achieve an FIA record. This is reflected in many of the design decisions and also greatly affects our choice of venue.

The car, on its trolley and trailer is a tight fit, but it has gone into the container. Image Credit: BSCC News

The British Steam Car has fixed gearing between the turbine and the wheels. When the car starts it is in top gear and only manages to pull away because of the incredible torque available from a stem turbine. Weighing 3 tons and starting in top gear means that the car accelerates very slowly toward its top speed. The team need a minimum of 6 miles to make the record attempt, 2.5 miles to accelerate, measure 1mile then decelerate for 2.5 miles, to allow room to accelerate on the return run so, for the record attempt, we required six miles of smooth, flat ( less than 1% gradient) which immediately preclude a record attempt in the UK.

Matt Candy, Engineering Administrator/Strategic Planner, BSCC says: "There are no runways or man-made flat surfaces six miles long - it has to be a natural feature. Beaches, lake beds or salt flats are often chosen for speed record attempts, including the well-known Bonneville Salt Flats. "We have chosen Rogers Dry Lake Bed in southern California as our venue for the record attempt, as it is a suitable surface with sufficient length. Rogers Dry Lake Bed is within the huge 308,000-acre Edward's Airforce Base site and is where the Space Shuttle lands if conditions in Florida are unsuitable. It is steeped in aviation history, and there has never been an official FIA land speed record achieved on site.

"It has another advantage for us - low altitude. Being only 2300 feet above sea level, the air at Rogers Dry Lake Bed is denser than at higher altitudes providing more oxygen for the car's burners"

Unfortunately as Edwards is an active top secure military base, people are unable to turn up to watch the attempts take place.
(ht: Rebecca Nicholls - Director, Eventageous PR Ltd for The British Steam Car Challenge)

The BSCC Team

Several members of the original ThrustSSC team have been brought back together to work on this project. With the previous success of the ThrustSSC team in the desert at Black Rock there is every faith that the project will proceed to set the record at 200 MPH without incident.

There are some additional roles that will have to be cast such as support crew, operations support and general support of the efforts at Thorney Island and Rogers Dry Lake Bed, Edwards Air Force Base. These roles will be partly dependant on the number of sponsors that attend the record attempts.

Driver - Charles Burnett
Test Driver - Don Wales
Engineering Logistics Coordinator - Frank Swanston
Team Coordinator and Administrator - Lynne Angel
Team Administrator - Kirsty Redfern
UK Liaison Officer - Elly Dalby
PR Liaison Officer - Pam Swanston
PR Manager - Rebecca Nicholls
Car Build Technician - Peter Prove
Technician - Clive Hawkins
Technician - Stuart Bailey
Engineering Administrator/Strategic Planner - Matt Candy
Wireman - Peter Dickerson
Electrical, Wiring and Computer Technician - Matthew Warr
Electric and Electronic Technician - Nick Bass
Composite Body Work - Mike Horne
Fabricator & Welder - Chris Yates
Fabricator Technician - Wilbur Day
Student Placement - Adam Tye
Design Draughtsman - Chris Lack
Transport - Nigel Leppard
Newtown Park Estates Manager - Richard Channell
Newtown Park Estates Logistics Manager - Rob Gray
Designer - Glynne Bowsher
Consulting Engineer - Peter Candy
Team Inspiration Chairman - Bill Rich
Webmaster - Martin Swanston

Welcome all from the British Steam Car Challenge to sunny, Southern California. Great success and Godspeed!

... notes from The EDJE



TAGS: Barber-Nichols Team, British Steam Car Challenge, BSCC, Matt Candy, Rogers Dry Lake Bed, Southern California, The EDJE